Lincoln Electric Holdings (LECO) Q3 2026 earnings call transcript

Transcript, summary, guidance, and what analysts pressed on from the Lincoln Electric Holdings Inc. call on October 27, 2026.

FreeSee Lincoln Electric Holdings' financials in GloomOpen in browser →Jump to the transcript
Held
October 27, 2026
Length
48 min
Tone
Confident0.72
Analysts
6
Words
7,057
Automation growth next 12 months
High single-digits organic growthmanagement outlook
2026 capital expenditures
$140 million to $150 millionraised range
Q4 Americas welding margin
20% to 21% EBIT margin
Q4 international welding margin
12% to 13%EBIT margin
Q4 Harris margin
Approximately 18%at current metal prices
Expert Link subscription
About $3,000 a yearper robot arm or cobot
Data-center share of business
Less than five percentoverall business exposure
Dividend increase
10% to $3.48 per shareannualized rate

Summary

Management framed accelerating demand against unusually difficult cost and supply conditions, emphasizing pricing recovery and investment to sustain growth.

  • 9%9% volume growth outpaced price for the first time in over two and a half years, with momentum continuing through October.
  • Record backlog and broad order strength support management’s confidence in automation growth into 2027.
  • AI-enabled Expert Link was presented as a longer-term market-expansion opportunity, not yet reflected in the order book.

Guidance

  • Low teens percent full-year 2026 sales growth
  • $140M$140 million to $150 million 2026 capital expenditures
  • $210M$210 million to $215 million quarterly SG&A
  • $4M$4 million to $5 million Q4 corporate expenses
  • 20%20% to 21% Q4 Americas welding EBIT margin
  • 12%12% to 13% Q4 international welding EBIT margin
  • 18%Approximately 18% Q4 Harris EBIT margin
  • High single-digit automation organic growth over the next 12 months

What analysts pressed on

  • 01Automation visibility: record backlog and orders support high single-digit growth over the next 12 months; longer-cycle projects may contribute earlier revenue.
  • 02Automotive cycle: management described improvement as a return to normal changeover activity, with capacity-driven investment still limited by low build rates.
  • 03Expert Link adoption: management called it a potential market broadener but declined to quantify TAM impact before seeing customer deployments in 2027.
  • 04Pricing and inflation: management cited limited customer pushback but declined to quantify 2027 inflation, saying it would monitor costs and adjust pricing.
  • 05Harris silver exposure: at current prices, Q4 pricing is expected to moderate to low double digits; management flagged a 2027 comparison headwind.
  • 06Data-center exposure: management estimated mid-to-high single digits of Harris sales and less than five percent of total business tied to data centers.

Notable disclosures

  • $3,000About $3,000 annual subscription per robot arm or cobot for Expert Link after the included first year.
  • Less than five percent of overall business is tied to data-center activity, despite repeated discussion of related demand and cost pressure.
  • Management said Expert Link was primarily internally driven, rather than a direct response to customers requesting the product.
  • Long-cycle automation projects use percentage-of-completion accounting, allowing some revenue recognition before customer production launches.

Risks raised

  • AI data-center demand is creating spot shortages and raising energy, logistics, electronic-component, and raw-material costs.
  • Management said it has been one step behind persistent supplier cost increases, pressuring incremental margins despite pricing actions.
  • International welding faces a $6 million to $7 million Q4 sales headwind from the ongoing conflict.
  • Harris faces a silver-price comparison headwind entering 2027, partly offset by demand for data-center cooling systems.

Tone: Confident 0.72

Strong volume, record backlog, and raised investment plans support optimism, tempered by persistent input-cost inflation and margin-recovery execution.

Who spoke

Company

  • Amanda ButlerInvestor Relations
  • Steven HedlundChairman and Chief Executive Officer
  • Gabriel BrunoChief Financial Officer
  • Unidentified Management

Analysts

  • Unidentified AnalystAnalyst
  • Angel CastilloAnalyst, Morgan Stanley
  • Neal BurkAnalyst, UBS
  • PeterAnalyst, DA Davidson
  • Nathan JonesAnalyst, Stifel Nicolaus
  • Walt LiptakAnalyst, Seaport Research

Full transcript

Analyst questions are marked with a bar. Timestamps are into the recording.

Prepared remarks

00:01

Greetings, and welcome to the Lincoln Electric 2026 Third Quarter Financial Results Conference Call. This call is being recorded. It is my pleasure to introduce your host, Amanda Butler, Vice President of Investor Relations and Communications. Thank you, Amanda, you may begin.

00:22

Amanda ButlerInvestor Relations

Thank you, Melissa, and good morning, everyone. Welcome to Lincoln Electric's Third Quarter 2026 Conference Call. We released our financial results earlier today, and you can find our release and this call slide presentation at LincolnElectric. com in the Investor Relations section. Joining me on the call today is Steve Headland, our Chairman and Chief Executive Officer, as well as Gabe Bruno, our Chief Financial Officer.

Following our prepared remarks, we're happy to take your questions. But before we start our discussion, please note that certain statements made during this call may be forward-looking and actual results may differ materially from our expectations due to a number of risk factors and uncertainties, which are provided in our press release, as well as in our SEC filings on forms 10K and 10Q. In addition, we do discuss financial measures that do not conform to U. S. GAP. A reconciliation of non-GAP measures to the most comparable GAP measure is found in the financial tables in our earnings release, which again is available in the Investor Relations section of our website at LincolnElectric. com.

And with that, I'll turn the call over to Steve Headland. Steve?

01:31

Steven HedlundChairman and Chief Executive Officer

Thank you, Amanda. Good morning, everyone. Turning to slide three, we reported record third-quarter sales in earnings performance with adjusted EPS increasing 21% to $2.98. Our results highlight two important trends we navigated in the quarter.

First, accelerating demand in core areas of the business and second, challenging operating conditions that we are diligently managing. Our strong earnings were driven primarily by operating leverage from mid-teens percent organic sales growth led by 9% volume growth. This is the first quarter in over two and a half years that volume growth has outpaced price, and volume momentum remains robust through October.

However, energy, logistics, and electronic component costs continue to increase with unprecedented AI data center demand creating spot shortages for some raw materials. While our supply chain and operations teams demonstrated great teamwork and agility in managing these supply challenges, the additional costs impacted our gross profit margin. We implemented price actions during the quarter in all three segments, which will enable us to achieve price cost neutrality in the fourth quarter.

We improved our adjusted operating income margin by 60 basis points to 18% at a 22% incremental margin, which was in line with our September update and delivered top quartile ROIC at 23.9% of 170 basis points compared with the prior year. We also focused on long-term growth and returns as we executed our capital allocation strategy. We invested $41 million in growth and returned $143 million to shareholders in the quarter.

We remain focused on serving our customers, advancing our rise strategy, and positioning the company for long-term success, turning to slide four to cover growth drivers in the quarter. Organic sales growth was broad with growth across all three reportable segments, product areas, and in all five end markets. Organic growth was largely driven by higher volume demand in the Americas region and Asia-Pacific and in select product areas in the Harris product segment. Sales in the US increased over 20%. Asia-Pacific continued to expand with growth in China, India, and North Asia.

Core Europe was relatively steady versus prior year, and we are starting to see benefits from European import tariffs and some defense spending. The Middle East was more resilient than expected with a $1 million sales headwind in the quarter. Capital spending continued to improve with high teens percent organic sales growth in automation, resulting in $232 million in automation sales in the quarter.

Equipment organic sales growth also accelerated to a low teens percent rate in the quarter. Strong order rates in both automation and equipment in the third quarter have elevated our backlog to new record levels, which positions us well for 2027. consumable volumes increased at a mid-single digit percent rate on a consolidated basis and performed higher in Americas and Asia-Pacific, where we are seeing the strongest level of industrial and infrastructure activity.

Looking at end sector trends on a consolidated basis, all five end markets grew in the quarter. General fabrication organic sales grew mid-20%, with the outperformance reflecting solid industrial production activity in the Americas, as well as data center related projects and rising HVAC demand in Harris. Energy and non-residential structural steel organic sales increased mid-teens percent, with energy outperforming in Americas welding and oil and gas due to strong project activity given the region's optimal positioning in the energy margin.

Heavy industries and transportation both grew at a low double digit percent rate. Heavy industries continued to see strengthening and construction and mining to support infrastructure, data center and mineral investments, while agricultural demand appears to be stabilizing. Transportation automotive growth benefited from easier prior to your comparisons in both production rates and in timing of automation shipments. We expect growth to continue in the fourth quarter as well.

Separately, the October domestic auto industry survey indicated a pickup in 2029 and 2030 model launches following two years of unprecedented compressor. That outlook is consistent with the increase in quoting activity we are seeing for a long lead time automation systems for transportation customers.

Moving to slide five, at the FAPTEC trade show last week, we launched over a dozen new solutions that address customer pain points and expand the addressable markets we serve. For example, ArcTracker Air provides customers with an easy to deploy platform that enables them to track productivity across their welding operations, regardless of the mix of brands or type of welding equipment in use.

We also launched a Hotwire submerged arc welding solution for our heavy industry sector customers that delivers up to 50% improvement in deposition rates using their existing installed base of Lincoln equipment with only modest incremental investments. Our new instruct arc extended reality welding trainer supports workforce development and training by providing a more realistic simulation of the welding experience.

And finally, I am most excited about the launch of expert link, our physical AI solution that will revolutionize welding automation featured initially on our Cooper COBOT, expert link enables a welding robot to adapt on the fly to real world conditions like an experienced human welder would. This capability significantly reduces barriers to adoption and broadens the market for cutting and welding automation.

We will be integrating expert link technology across our automation portfolio over the next few years, which will further differentiate the value of our innovation and support our rise growth objectives.

07:54

Gabriel BrunoChief Financial Officer

I will now pass the call to Gabe Bruno to cover third quarter financials in more detail. Thank you, Steve. Moving to slide six, third quarter sales increased 15% to $1,221 million. Sales growth reflected approximately 9% higher volumes and 6% higher price. We anniversary the acquisition of Alloy Steel in August, which contributed 50 basis points to sales growth.

Growth profit increased 9% to $425 million on higher sales. Our growth profit margin compressed 190 basis points to 34.8% primarily due to the timing of our new price increases, which went into the fact late in the quarter and unfavorable mix. On a year to date basis, we are lagging on neutral price cost target by 100 basis points and expect to achieve a neutral price cost position in the fourth quarter.

SGA expense was relatively steady versus prior year at $206 million, while SGA as a percent of sales improved 260 basis points to 16.9% as a result of sales leverage. SGA expense included an additional $5 million in corporate investments related to the rollout of our ride strategy and related initiatives. Given current rides, investment activity and business performance, we are maintaining our quarterly SGA estimate at 210 to $215 million with corporate expenses likely in the four to $5 million range in the fourth quarter.

Reported operating income increased approximately 20% to $211 million, primarily on higher sales leverage. Adjusted operating income increased 19% to $220 million and our adjusted operating income margin improved 60 basis points to 18% with a 22% incremental margin.

Third quarter diluted earnings per share increased 19% to $2.63, adjusted earnings per share increased approximately 21% to a record $2.98. We recognize a 4% benefit from shared repurchases and there was no impact from foreign exchange translation.

Moving to our reportable segments on slide seven. America's welding sales increased approximately 16% to $801 million, primarily from 13% higher volume and 2.4% higher price. America's volume growth was broad based across all product groups and end markets and in key market channels. Equipment and automation each delivered high teens percent volume growth supported by strong capital spending. Consumable volume growth increased to a mid to high single digit percent rate as industrial activity accelerated.

Price reflects the benefit of the main price action. We expect price in America to be in the low to mid single digit percent range in the fourth quarter reflecting third quarter price actions.

America's adjusted even increased approximately 27% to $167 million. Adjust the EBIT margin expanded 190 basis points to 20.1%. The increase was driven by higher organic sales and improved automation performance, which was partially offset by price cost headwinds. We expect America's welding margin to perform in the 20 to 21% EBIT margin range for the fourth quarter given sales momentum and improved price cost performance.

Moving to slide eight, international welding segment sales increased 3% to $227 million on 1% lower volume, 2.4% higher price and approximately 2% benefit from acquisitions.

Within international welding continued strength and Asia Pacific was offset by weak capital spending across Europe and lower sales to the Middle East. The ongoing conflict reduced segment sales by approximately $5 million in the quarter. We continue to expect a six to $7 million sales headwind in the fourth quarter.

Adjust the EBIT decreased 7% to $24 million. Adjust the EBIT margin compressed 100 basis points to 10.3% primarily due to lower volumes and in automation performance.

Sequential performance versus a second quarter was better than seasonal trends due to a pickup in demand in our alloy steel acquisition and incremental structural savings.

We expect international welding margin performance to be in the 12 to 13% range for the fourth quarter. Moving to the Harris products group on slide nine, third quarter sales increased 29% to $193 million primarily from a 3% increase in volumes and approximately 26% higher price.

Price primarily reflects higher metal input cost and consumables, particularly silver. HVAC and gas equipment demand supported volume growth while the retail channel remained challenged on soft housing trends. We expect HVAC demands to remain strong in the fourth quarter further aided by an easier prior year comparison.

Adjust the EBIT increased 21% to $34 million on higher sales. Adjust the EBIT margin declined 100 basis points to 17.3% which was below our expected range due to unfavorable mix and operational inefficiencies. We expect the Harris segment to operate at approximately an 18% margin in the fourth quarter at current metal prices.

Moving to slide 10, cash generation was strong with $216 million in cash flows from operations. Working capital improved to 16.6% of sales on higher sales levels as well as improved inventory positions. We achieved 107% cash conversion for the quarter and are at 99% on a year-to-day basis which is in line with our 100% target for the year.

Moving to slide 11. We invested $41 million in capital expenditures and returned $143 million to shareholders including $43 million in dividends and $99 million in sharing repurchases. Adjusted return on invested capital improved to 23.9%.

Our dividend is an important component of our capital allocation strategy. The board recently announced the company's 31st consecutive annual increase in the dividend payout rate raising the annualized rate by 10% to $3.48 per share. The increase reflects confidence in the execution of our ride strategy, the strength of our cash generation, and our commitment to return value to our shareholders.

The first payment at the increased rate is payable in January 2027. Moving to slide 12 to discuss our 2026 operating assumptions. We are raising both our full year sales growth rate and our capital expenditure range to reflect stronger demand trends and higher ride strategy investments.

We now expect next sales growth to be in the low teens percent range for the full year which aligns with our performance year-to-date. We are maintaining the updated assumptions we provided in September for price costs and our adjusted income incremental margin.

We expect price costs will be neutral in the fourth quarter which will support year over year growth margin expansion in the period as well as the mid-20% incremental adjusted operating income margin.

We are increasing our 2026 capital expenditure range to 140 to 150 million dollars as compared with our initial assumption of 110 to 130 million dollars. We have invested 112 million dollars in the first nine months and are continuing to invest to upgrade operating capacity and capabilities in the fourth quarter. Our full year interest expense, tax rate, and cash conversion assumptions are unchanged.

Looking ahead, our priorities are to execute on our ride initiatives, serve the main and growing areas of the market, and invest for long-term returns. We continue to expect strong earnings performance as we advance those priorities.

And now I would like to turn the call over for questions.

Questions and answers

17:07

Ladies and gentlemen, at this time, we will be conducting a question and answer session. If you would like to ask a question, simply press star one on your telephone keypad. If you would like to withdraw your question, press star one again. To ensure that everyone has an opportunity to participate, we ask that you ask one question and one follow-up question, and then return to the queue. Please remember to unmute your device locally. We'll pause for just a moment to compile the Q&A roster. Your first question comes from the line of Brian Blair with Oppenheimer. Your line is now open. Please go ahead.

17:56

Unidentified AnalystAnalyst

Thank you. Morning, everyone.

17:59

Unidentified Management

Morning, Brian? No, it's open.

18:01

Unidentified AnalystAnalyst

I hope you could offer some more color on the momentum in Outlook for your automation strategy. Seems like demand is broadening. You mentioned kind of the medium-term outlook with changeover activity in the automotive space. Maybe touch on quoting activity across other end markets there. And then given your back lock position of current reads, where do you see automation revenue shaking out for 2026?

And what's the preliminary outlook to the extender willing to speak to that for 2027?

18:38

Steven HedlundChairman and Chief Executive Officer

Yeah, so Brian, so I just would reiterate the level of growth. We've seen very active quoting activity and broad base, and we pointed to the mix of end-market progression, including the automotive market. So we're pleased to see the long-term trajectory of model launches turning positive in 2029 and 2030, which leads us to believe that a lot of the quoting activity that we've seen along the lead time items would progress into orders as the months progress.

So we're really keen on a continued progression of growth in our automation business. And think about that in the high single-digits organic type growth. I'm very much positioned to continue to expand the margin profile of our business. We exited the third quarter at a low double-digit type EBIT profile, and we expect more of the same in the fourth quarter.

19:39

Unidentified Management

Yeah, Brian, I would just add that, you know, it gives comments really applied to the historical base of the business, which has been a large portion of automotive automation projects, some for heavy industries, particularly supporting mining, construction, agricultural equipment. We're seeing improvement across the legacy base of the business. We're also very excited about the opportunity to grow the addressable market, particularly in the general industries, general fabrication space, by making the technology more easily easy for customers to adopt.

One of the big problems those customers have is their parts aren't entirely consistent a lot to lot due to upstream variation. And historically, that's made it hard for them to adopt robotic solutions, whether that's an industrial robot or a cobot. And we're really excited about the launch of the expert linked platform that's going to address that pain point and significantly open the market up for the long term.

20:38

Unidentified AnalystAnalyst

That's encouraging. We appreciate the color. And then in terms of your Middle East exposure, we know the headwind that has been there and you framed anticipated Q4 in fact, looking forward to hopeful resolution of the war.

How should we think about how much of a catalyst to rebuild efforts and redundancy slash security investments may be for your business, at least over the medium term?

21:04

Steven HedlundChairman and Chief Executive Officer

Just in general, Brian, you saw that while in the international segment, we had a headwind of five million overall, we were down once. We saw strength and exports coming out of the Americas and Harris segments.

So we're well positioned. You can think about the headwinds turning into volume opportunities for us as projects progress in their investment trajectory as well as any rebuilding. So we're well positioned in Middle East, and we look to growth as the conflict is resolved and the markets return to some basis of what is normal.

21:43

Unidentified AnalystAnalyst

Understood. Thanks again.

21:46

Your next question comes from the line of Angel Castillo with Morgan Stanley. Your line is now open. Please go ahead.

21:55

Angel CastilloAnalyst, Morgan Stanley

Hi, good morning and thanks for taking my question. I wanted to touch on the pricing power a little bit and maybe just on fact, the price cost dynamic and a bit more detail. Just, you know, you noted passing through a little bit more price toward the end of the quarter. So just curious as you're having discussions with customers, OEMs or distributors, just can you kind of update us and what you're seeing your hearing in terms of, you know, overall kind of elasticity to kind of price. Given the organic volumes, it would suggest that you're not really seeing any deterioration there, just but, you know, given how much inflation we've been having would be curious to say, your thoughts and your ability to contain a kind of push price.

22:32

Steven HedlundChairman and Chief Executive Officer

Angel, I would say that our channel partners and our end users are experiencing the same inflationary pressures that we are. So this isn't coming as a shock to them. Nobody likes talking about pricing because it takes your attention away from other matters, but we're not getting a tremendous amount of pushback in either case, because people understand certain parts of the economy are running hot with the AI data center filled out and it's a constant surprise, the breadth of commodities and products that are impacted by that. So it's never a dull moment and we're doing our best to be agile and stay on top of it, but it's a constantly chasing target that we're going after.

23:15

Gabriel BrunoChief Financial Officer

Yes, I would add and affirm what we've updated the markets in September is we expect in the welding business about 100 basis points in criminal pricing impact that would lead us into a price cost neutral posture in Q4. So we've maintained that posture, but as you know, we'll continue to monitor the a persistent inflationary dynamics and respond as appropriate.

23:40

Angel CastilloAnalyst, Morgan Stanley

Sorry, up on maybe just on that note, as we think about kind of your preliminary thoughts or what you're able to see into 2027, can you talk about the kind of key kind of cost buckets and what you're seeing across all of those? I think earlier, maybe some pockets of kind of shortages of supplies to just any kind of thoughts on what kind of inflation or cost inflation you're kind of anticipating into next year.

24:07

Steven HedlundChairman and Chief Executive Officer

Well, I would say just not getting too specific about inflationary type conditions into 2027, but I would say that we're very well postured with what we're seeing in the market for what our strategic framework on organic sales are, which I would just reiterate, it's mid to high single digit type organic growth, of which would lean on an acceleration and automation growth in the high single digit. So we're very well postured for that kind of trajectory as we get into 2027.

24:37

Angel CastilloAnalyst, Morgan Stanley

Very helpful. Thank you.

24:41

Your next call comes from the line of Neil Burke with UBS. Your line is now open. Please go ahead.

24:51

Neal BurkAnalyst, UBS

Hey, good morning. Thanks for the question. Maybe another way to kind of ask about automation growth trend. I mean, is there any way to kind of bifurcate between more cyclical improvement on one hand, but also more secular growth from increased automation adoption?

You know, I asked because the comments about the automotive on market seem more cyclical. I'm not sure if that coding activity is hitting revenue yet, but you know, automation sales are broadly outperforming your other product categories, you know, despite low double digit growth broadly, our performance of automation on top of that. So just trying to get at, you know, how much of this high team's automation growth is cyclical, versus more kind of automation adoption driving secular growth.

25:40

Steven HedlundChairman and Chief Executive Officer

You know, cyclical is an interesting word, important to realize that we had an unprecedented two year period where the automotive manufacturers were walking back their commitment to transition from ICE to EVs, and then trying to figure out whether they were going to go ahead long into the hybrid platform, whether they're going to return to ICE, et cetera. And that caused what we described as an air pocket of decision making among those end users. They knew they were going to do something that didn't know exactly what they were going to do, and as a result, that really created a period where the end users were unable to make a decision regarding automation capex. We're now getting through that, and we're seeing the resumption to more than normal level of activity.

So on a year over year basis, it does look like a significant step up. I would say it's more return to normalcy in the automotive market. In terms of using technology to broaden the applicability of automation, I think we're still in the very early innings of that. It started first with the launch of cobots and the Cooper software that made a cobot easier to program. We got a lot of feedback from customers. An operator still had to have a fair amount of welding knowledge to be able to set the feeds and speeds on the welding procedure in order to make the cobot useful to them. So we were hard at work at trying to address that with a physical AI solution, and we're very confident that that platform is going to significantly broaden the market going forward.

But again, that's a product that was just launched last week. So I don't think we're seeing the benefit of that yet in our order book.

27:26

Unidentified Management

And you know, just to add to that, when you think about the mix of our business, you've heard us emphasize the intentionality of driving more activity and small mid-sized fabricators in general industries in general and structural and heavy fab. So you're seeing a progressive mix in those end markets in a smaller percentage of their overall mix in automotive although automotive is an important part of our mix of business. So all the investments we're making and the technologies will progress our positioning in general industries.

28:04

Neal BurkAnalyst, UBS

Thank you. That's helpful. And one follow up on margin. You're expecting improvement from low to mid 20 percent criminal margin for the company and for Q. I know there's a lot of moving parts around cost inflation, which continues. But based on where we are today is kind of mid 20 is the right way to think about incremental going into next year or early enough sort of price costs tailwinds or normalization to maybe think about approaching your high 20 incremental target for the long term. Yeah.

28:36

Gabriel BrunoChief Financial Officer

So I would start with that mid 20s as we exit Q4, but our line to side is to drive to that high 20s incremental margin. So very much focused on expanding our margins as you know as part of our 23 objectives, 300 basis points. That implies about 60 basis points per year of improvement. So that's really our focus. So you'll continue to see a level of execution that's anchored around that 60 basis points improvement on an annual basis.

29:10

Steven HedlundChairman and Chief Executive Officer

You know what I would say is please as we are with the performance of the business, particularly with organic growth, resuming, we recognize that the incremental margins are a little shy of where we would like them to be. And the persistent inflation we've seen in the business has been a constant game of whack-a-mole in terms of being hit with a surprise cost increases from our suppliers who are seeing themselves increase demand from data centers. So we're competing for the same parts as people building data centers in many cases. And so we've been aggressive in taking price actions to cover that. We've just been constantly, you know, one step behind, which is not a position we'd like to be in.

So we believe that we've taken enough price to cover what we already know in the business. We'll be diligent about continuing to manage price going forward. And we're very focused on driving productivity in the operations, whether that's manufacturing or the back office operations in the company to help us hit that incremental margin target.

30:10

Neal BurkAnalyst, UBS

Great. Thank you.

30:10

Your next question comes from the line of Meg Dobre with Baird. Your line is now open. Please go ahead.

30:20

Unidentified AnalystAnalyst

One. Sorry, I want to go back to automation as well. That's what the focus of the day is. But I'm just looking to make sure that I understand kind of what you're communicating here. It sounds like, essentially, you're pretty much in the year acceleration and automation in the back half that is happening. What I'm hearing as incremental is your comment on auto and especially on 28 and 29. So I guess my question is, do you have enough near term sort of visibility to shipments to suggest that automation can continue on this growth trend in 2027? Or is this more 2028, 29 business debt that your bookings are expectations really ought to be more about those out years?

31:11

Gabriel BrunoChief Financial Officer

Yeah, so Meg, we're talking about the next 12 months. I'm talking about high single digit type growth. We've seen enough in incoming orders and another record level backlog that gives us confidence of strum momentum going to 2027. The long lead time items will also have an impact depending on how the orders progress for fulfilling 2028 to 2029 build outs still. So we have the confidence based on what we've seen in orders in our backlog levels that carry the momentum into 2027.

31:46

Steven HedlundChairman and Chief Executive Officer

Yeah, Meg, it's important. Remember that for some of the very long cycle projects, we're on percent completion accounting. So as we do the work in 2027 to get ready for a project that might be supporting a 29 launch, we're recognizing some of the revenue in 27. We also have more confidence in the general industry, general fabrication part of the business that is a little shorter cycle, right? So more standard wealth cells and cobots that we would ship in several weeks, not several quarters. And given the demand trends we're seeing in the in the business right now, we have more confidence in that part of the business for 2027.

32:22

Unidentified AnalystAnalyst

That's great. My follow-up, I want to talk a little bit about Harris products groups. And in here, obviously pricing has been very strong, but filter prices have pulled back. So when should we expect negative pricing, if at all, presumably we will have some based on current commodity prices. And is there a rule of thumb about how that flows to a bit in terms of the contribution to either incremental dollars or margin or even dollars, however you want to frame it for us?

33:01

Gabriel BrunoChief Financial Officer

Yeah, so Meg, I think it's important to note that our discussions are all based on what we currently see in the market. So let's say you're tracking in the high 50s, low 60s, protroyance on silver prices. If you just use that kind of assumption in Q4, we're talking about low double digit type price increases versus the mid 20s that we saw in Q3. That's the framework that gives us confidence at that 18% EBIT profile. And that's kind of what we see at this point in the model. And we'll have some positive impacts on volumes, we're starting to see that. But right now we see our business model, at that 18% type profile. And then maybe we'll start anniversary against some of the big run up in silver earlier this year as we turn into 2027.

33:54

Steven HedlundChairman and Chief Executive Officer

The way that we manage pricing in that part of the business is to try to maintain a fairly constant gross margin percentage on those sales. Obviously if silver prices double, you have twice as many dollars running to the P&L. So you get some nice SG&A leverage. And on an EPS basis, you get a little bit of a tailwind from that. So as we look forward in the Harris business, we're aware that there's a looming comp issue on silver pricing going into next year. But we're also seeing strong pickup and demand for people who are providing cooling systems data centers. And that's going to help that part of the business as we go forward. So some various puts and takes as we think about the Harris business in 27.

34:44

Unidentified AnalystAnalyst

I appreciate that.

34:44

Your next question comes from the line of Chris Dankert with DA Davidson. Your line is now open. Please go ahead.

34:55

PeterAnalyst, DA Davidson

Good morning. This is Peter on for Chris today. Coming off FabTech last week of customers reacted to new product launches, booting expert link. And I think secondly, in regard to physical AI, these new products result with customer specific requests to the company trying to source new opportunities.

35:23

Steven HedlundChairman and Chief Executive Officer

Yeah, great question, Peter. I would say the reaction to customers across the board to the product that we highlighted at FabTech was extremely positive and very encouraging. And I'd like to give kudos to the team that was working the booth there. I thought they did a tremendous job sharing their passion for our products and helping customers resolve their issues around productivity and quality and the like. And all of the products we're launching are directly aimed against customer pain points, including expert link, which was not necessarily customer driven in the sense of people asking specifically for it. That more reflects our decades of experience in the welding industry and our knowledge of what tends to go wrong when people try to automate their wealth, cutting and welding processes.

So you could say that at some level that reflected our understanding of customer needs, but it was primarily internally driven.

36:16

PeterAnalyst, DA Davidson

That's helpful. And I guess for my follow up in terms of the raised cap acts for the year, could you provide some additional color on that?

36:32

Gabriel BrunoChief Financial Officer

Yeah, so you've seen a trend, Peter, over the years of our continued investment in our operations and you pointed to the ROIC performance. So we will invest in capacity and any capabilities, including automation within our own facilities and new products to be able to drive organic growth. So we're very much focused on an increasing level of investment in our operations.

37:02

Steven HedlundChairman and Chief Executive Officer

Yeah, Peter, I would say that historically the rate limiting factor on organic internal capex, which is the highest returning investments we make in the business. The rate limiting factor hasn't been our willingness to invest. It's our capacity to execute the projects and we've been working very diligently to improve our capability and capacity to execute these projects on time, on budget and to do more of them faster. So that's why you're seeing a pickup in the capex investment.

37:33

PeterAnalyst, DA Davidson

Great. Thank you. I'll pass it on.

37:36

Your next question comes from the line of Nathan Jones with Steeple. Your line is now open. Please go ahead.

37:43

Nathan JonesAnalyst, Stifel Nicolaus

Good morning, everyone. I'm going to donate to a couple of questions on automation. Hey, Steve, you talked about the automotive side of this getting back to a more normal level. I think the planned model launches in 29 and 30 are anything but a normal level. They're significantly above a normal level. Now there's questions about whether or not they can get them all launched. Can you talk about the opportunities that creates a little bit further out for the automation side of the business, just given the magnitude of those product launches?

And would that be a 28 event, primarily? I know you said some long lead time stuff in 27, but that would primarily be running through revenue in 28 from that kind of thing.

38:33

Steven HedlundChairman and Chief Executive Officer

Nate, I would say if you think about automotive in particular, there's two drivers of capex related to automation. One is model changeovers, which historically have happened pretty much like clockwork, and we talked a little bit earlier in the call about the air pocket and the recovery from that. The second is production rates. Production rates increase. We see investments in capacity to help those customers keep up with demand. And right now, automotive build rates are still fairly low. So we're benefiting from the pickup now in model changeover investments, but we're not really seeing the big capacity driven investment. So I think it's fair to say that we're encouraged by where the automotive portion of automation is headed.

It's still early innings, and we're hopeful that we're going to continue to grow that business both in automotive and in the other end markets that we serve.

39:29

Nathan JonesAnalyst, Stifel Nicolaus

Okay, the second one I wanted to ask was more around the AI powered cobot outlook and how that could change the growth profile. I think over the years, a lot of the automation increase in the addressable market has been improvements in the software that enabled more automation or material handling that enabled more parts of the market to be automated.

Can you talk about how you think this AI powered cobot, something that can be a bit more flexible and well, something that's maybe a little less predictable, plays out over the next few years in terms of increasing the time that is addressable by automated welding that maybe isn't today, if that makes sense.

40:19

Steven HedlundChairman and Chief Executive Officer

Yeah, a fair question, Nate. Look, I'm really excited about it because over the years, as I've talked to customers, their biggest frustration is my parts aren't perfect, and I know my parts aren't perfect. And if I had a human doing the welding operation, they would see, you know, for example, the gap getting wider, they would slow down, they would weave, they would increase the the wire feed speed. They know what to do to adapt to those parts. The problem with a robot or a cobot historically is you've given it one path and one set of parameters, and it just repeats those irrespective of what the actual reality of the parts in front of it is.

So that that's been a huge pain point for customers. Historically, your only real option was to invest in fixturing or tooling to force the parts back into tolerance, which automotive can afford to do given the production volumes. But if you're a high mixed low volume manufacturer, it's just been uneconomical and infeasible for them to automate certain parts of their operation. The feedback that we were getting at the show was this is an absolute game changer. It basically allows a robot to operate like a human would and adapt on the fly with no additional programming, no additional training. And so people are really excited about it. How much it will increase the TAM? Great question. And as we go through the course of 2027, we'll probably have a better perspective on that when we see what customers or how they're actually deploying expert link and what applications are using it for.

Look forward to hearing about that next year.

41:59

Nathan JonesAnalyst, Stifel Nicolaus

Thanks for taking the questions.

42:04

As a reminder, if you would like to ask a question, please press star one to be added to the queue. Your next question comes from the line of Steve Barger with key bank capital markets. Your line is now open. Please go ahead.

42:22

Unidentified AnalystAnalyst

Thanks. Good morning. Steve, I just want to follow up on that last comment with end markets broadening out and automation looking like it's picking up. Is the sales team focused now on adding customers who haven't automated because they've been scared of the programming or just the difficulty of getting it to work? Or are you more focused on increasing the number of automated applications with customers who already get it because they've already bought systems?

Yeah.

42:52

Steven HedlundChairman and Chief Executive Officer

Great question, Steve. I'd say both, right? So if we look at some of the businesses we have within the automation portfolio, for example, Zeeman that does structural steel welding, we're going to deploy expert link into their systems to make them even more effective than they are already, right? So to create competitive differentiation with other solutions that are targeting existing automation customers. And then more importantly is to look at all those customers that have attended a demo of a cobot and decided that's neat, but I just can't use that in my operations, right? I have too much part variability. I have too much too many changeovers. This isn't going to work for me. And we've had a lot of customers get excited about what they believed the potential of a cobot was and then disappointed with the reality of what it actually took to make one work.

And so that's what we're trying to address with this technology platform is to really deliver on what the initial promise and premise of a cobotic welding was, right? Very easy to use, doesn't take a skilled or trained operator, and significantly addresses real world problems that our customers face.

44:04

Unidentified AnalystAnalyst

Got it. Does expert link have a subscription element to it or is it a one time sale?

44:11

Steven HedlundChairman and Chief Executive Officer

It has a subscription element to it. The way that we're pricing it is the first year subscription is included as part of the original purchase. And then there is an ongoing subscription fee that is about $3,000 a year per use per cobot or robot arm.

44:24

Unidentified AnalystAnalyst

For device, yeah, okay.

44:35

Steven HedlundChairman and Chief Executive Officer

Yeah.

44:35

Unidentified AnalystAnalyst

And then Gabe, one quick follow up. I just want to make sure I understand you get the neutral price cost in 4Q. How much temporary gross margin pressures remain? And I guess, what is the clean underlying incremental margin starting point for 2027? Are you back to mid to high 20s?

44:55

Gabriel BrunoChief Financial Officer

Yes, I would say we would start off at mid 20s. We do expect, and if you picked up on my comments, Steve, that gross profit margin will exceed the prior year, fourth quarter. So we do believe that we took the pricing actions necessary to get to neutral. And then as we progress into Q floor and into 2027 that we've achieved that mid 20s type of incremental.

45:16

Unidentified AnalystAnalyst

Okay, got it. Thank you. Welcome.

45:27

The last question comes from the line of Walt Liptech with Seaport Research. Your line is now open. Please go ahead.

45:34

Walt LiptakAnalyst, Seaport Research

Okay, thanks. In good quarter, guys. I wondered you guys called out equipment being up really solid double digits. And coincidentally, one of your competitors had a tornado and the market seems to have gotten impacted. Did you see a pickup related to that? And help us understand if that's what happened if it's like a one timey thing or if there was a market share game related to that?

46:14

Steven HedlundChairman and Chief Executive Officer

Well, you know, it's very difficult to assess that. What we do know is that we've seen consistent demand on standard equipment to track at the high teams level. So I won't comment on the competitive positioning, but we've got a robust level of activity and we see the same momentum going into Q four.

46:33

Walt LiptakAnalyst, Seaport Research

Okay. All right. Great. And then just the last one, you know, you guys called out data center number of times and the impact on the welding markets. I wonder, have you been able to quantify it either at Harris or at, you know, kind of the the welding business overall?

Yeah.

46:58

Gabriel BrunoChief Financial Officer

So Walt at Harris, we estimate between mid to high single digits as far as Harris segment to be exposed to data center activity. And just to remind you, last year, there was a de-stocking progression in the fourth quarter 2025. So we've got easier times, but we're seeing a very good activity and we expect good momentum on the Harris side to progress into the fourth quarter.

On an overall basis, we do have pockets of projects on the automation side supporting data center activity. But a lot of the work we do is indirect into the markets. And so we estimate about less than five percent of our overall business that's tied into data center activity.

47:43

Walt LiptakAnalyst, Seaport Research

Okay. Great. Thank you.

47:43

This concludes our question and answer session. I would now like to turn the call back to Gabe Bruno for closing remarks.

47:57

Gabriel BrunoChief Financial Officer

Thank you, Melissa. I would like to thank everyone for joining us on the call today and for your continued interest in Lincoln Electric. Our focus remains on converting demand into profitable growth, improving our price cost performance, and investing in differentiated solutions through our RISE strategy. We look forward to updating you on our progress. Thank you very much.

48:19

Thank you, ladies and gentlemen. This concludes today's conference. Thank you for participating. You may now disconnect.

Other Lincoln Electric Holdings earnings calls

  • Q2 2026 earnings call

    Management framed the quarter as an inflection in volume and customer investment, supporting a higher full-year outlook despite persistent cost and geopolitical uncertainty.

    Jul 30, 2026Confident0.78
  • Q1 2024 earnings call

    Management defended unchanged full-year assumptions despite weaker short-cycle demand, citing automation backlog, margin execution and tentative Americas stabilization.

    Apr 25, 2024Positive0.62
  • Q4 2023 earnings call

    Management framed 2024 as conservatively guided but increasingly supported by automation demand, productivity investment and a robust acquisition pipeline.

    Feb 15, 2024Confident0.78

All Lincoln Electric Holdings transcripts

About this transcript

The summary, guidance, analyst focus, and tone are automated and should be checked against the call before being relied on. Names and figures can be misheard. Listen to the replay.